|
Consolidated Metal Products, Inc. |
|
Assembly parts in Grand Rapids Michigan
We have provided many different assemblies to our customers and have
experience with many different components. here are some examples of the
assemble we have done.
This is an aerospace part using miniature custom
rivets. We assemble this using tooling made in house we call the "
Drop Tron " uses a weight and gravity to provide a consistent force.
This has worked well to roll the straight rivet used in this assembly
This sturdy control cabinet is used to control a 6
cylinder gasoline engine used in a special application. The assembly
is made from 19 different parts. Just about all of the parts are laser
cut and formed in house. We used our customer's 2-D drawings to create
a 3-D assembly using Solid Edge. The allowed us to generate the
correct blank size with no trial and error and the parts were to print and
the fit of the parts made the welding of the assembly much easier which
saved time and money.
This enclosure is laser cut and drawn in house. The stainless nut
plate at the bottom of the enclosure is CNC machined in house. The
swivel nuts on the sides are riveted and bonded using 3M adhesive. One of
our suppliers applies the chemical film and another applies the Deft primer
coating.
These enclosures were designed and manufactured in
house. We were asked to design and build an enclosure to fit around a
blower motor and to design and build a hand tool to incorporate a
cylindrical brush with a shield driven by a pneumatic motor. The cylindrical
brush spins on bearings mounted on both sides.
This aluminum part is laser cut and formed in house. One of our
suppliers applies the chemical flim. Then we installed a PEM fastner
using a squeeze gun.
|
|
|
3831 Clay Ave. S.W., Grand Rapids, MI 49548 Phone: 616-538-1000 Fax: 616-538-1180 |